How to measure curtain length and width

 
 
Accurate curtain measurements begin with two separate decisions: how to measure curtain length and width and how wide the curtain hardware should span and what size finished panels you need. Then, measure length from the correct point for your chosen header and decide where the hem should end. A metal tape measure, pencil, and notes will help keep the details consistent.

1. Plan the rod or track span

If your rod or track is already installed, measure its full usable width—the span the curtains are intended to cover. If it is not installed, decide where the hardware will sit and how much of the window or wall it should cover before ordering. Rawlune’s curtain measuring guide likewise starts with the rod or track measurement when hardware is already in place.

2. Work out finished panel width separately

The rod or track span is a hardware measurement, not automatically the finished width of the curtain panels. Panel width describes the fabric width you are ordering; fullness, the number of panels, and the retailer’s sizing method affect how that relates to the span. Check whether the product asks for a total width or a per-panel width, and follow its exact instructions. There is no single fullness multiplier that applies to every fabric, header, or ordering system. The Shade Store’s curtain measuring guide also treats rod width and panel width as distinct measurements.

3. Measure length from the right starting point

Choose the curtain header first, then measure down to your desired hem position. For pleated headers, Rawlune’s guide says to start at the underside of the rod or track; for rod-pocket, grommet, or tab-top styles, it says to start at the top of the rod. For a sill-length look, end at the sill; for floor-length curtains, choose whether the hem will just clear the floor or meet it; for a puddled look, allow the extra length your retailer specifies. Rawlune illustrates floor, slightly-above-floor, and puddle finishes in its measuring guide.

4. Double-check before you order

Measure the length at several points if the floor or ceiling may be uneven, and record the unit of measurement. Confirm whether a retailer’s listed length includes the header, and whether panel width means flat fabric width or a specified coverage. Before checkout, compare your notes with that retailer’s exact measuring guide; instructions can vary by heading and product.
When you’re ready, browse Rawlune’s custom curtains and use the product-specific measuring instructions before submitting your dimensions.
Posted in École de football (Soccer) on November 12 at 03:20 AM

Comments (0)

No login